Hardness
Very Hard
353 PPM · 20.6 GPG
Local water dashboard
Official source aggregationA source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Switzerland County.
At a glance
EPA quarter 2026Q2
Hardness
Very Hard
353 PPM · 20.6 GPG
Compliance screen
No active flag
0 active health-based records
Lead 90th percentile
0.0041 mg/L
27% of action level
Utility match
1 system
Serves 11,937 people system-wide
Hardness meter
Estimated local hardness
USGS hardness classification scale
353 PPM
Parts per million
353
mg/L as CaCO₃ equivalent
Grains per gallon
20.6
1 GPG ≈ 17.1 PPM
What this means at home
At 353 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.
USGS sites used
61
Nearest site
1.8 mi
Observation range
Jun 2, 2016–Sep 9, 2025
Estimate confidence
Moderate
Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: IN5278001 SWITZERLAND 00574 PRODUCTION WELL 5 (Well).USGS source documentation ↗
Regional context
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
Patriot median
353 PPM
About the same1 indexed ZIP readings · Range 353–353 PPM
Indiana median
313 PPM
40 PPM higher472 indexed ZIP readings · Range 132–371 PPM
EPA benchmark screen
Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.
Lead (PB90)
0.0041 mg/L
Reported Dec 31, 2023
Copper (CU90)
Not available
No numerical 90th-percentile result
Numerical coverage
1 comparable result
Missing values remain blank; absence is not treated as a pass.
Measured in mg/L
Local 0.0041
EPA limit 0.015
100% line = listed limit
| Contaminant or rule | System | Status | Period |
|---|---|---|---|
| E. COLI | IN5278001 | Resolved | Jul 12, 2025through Jul 16, 2025 |
| E. COLI | IN5278001 | Resolved | Jul 12, 2025through Jul 16, 2025 |
| E. COLI | IN5278001 | Resolved | Jul 12, 2025through Jul 16, 2025 |
| Revised Total Coliform Rule | IN5278001 | Resolved | Sep 1, 2021through Sep 30, 2021 |
| Revised Total Coliform Rule | IN5278001 | Resolved | Aug 1, 2021through Oct 5, 2021 |
| TTHM | IN5278001 | Resolved | Jan 1, 2021through Dec 31, 2021 |
| Total Haloacetic Acids (HAA5) | IN5278001 | Resolved | Jan 1, 2021through Dec 31, 2021 |
No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.
Solutions matcher
Matched to Patriot ZIP 47038 using 353 PPM nearby hardness and 1 reported measurement benchmarks.
Scale protection
353 PPM is 3× the high-hardness trigger used by this matcher.
Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.
Compare whole-house systemsAffiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.
Frequently asked
EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.
Nearby USGS observations produce an estimate of 353 PPM, or 20.6 grains per gallon, classified as very hard. This is not a household tap measurement.
At 353 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.