Hardness
Very Hard
349 PPM · 20.4 GPG
Local water dashboard
Official source aggregationA source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Boone County.
At a glance
EPA quarter 2026Q2
Hardness
Very Hard
349 PPM · 20.4 GPG
Compliance screen
No active flag
0 active health-based records
Lead 90th percentile
0.0012 mg/L
8% of action level
Utility match
1 system
Serves 1,600 people system-wide
Hardness meter
Estimated local hardness
USGS hardness classification scale
349 PPM
Parts per million
349
mg/L as CaCO₃ equivalent
Grains per gallon
20.4
1 GPG ≈ 17.1 PPM
What this means at home
At 349 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.
USGS sites used
27
Nearest site
18.8 mi
Observation range
Mar 30, 2016–Sep 10, 2025
Estimate confidence
Moderate
Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: NAWQA AG WELL TP25 NEAR ZIONSVILLE, IN (Well).USGS source documentation ↗
Regional context
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
Thorntown median
349 PPM
About the same1 indexed ZIP readings · Range 349–349 PPM
Indiana median
313 PPM
36 PPM higher472 indexed ZIP readings · Range 132–371 PPM
EPA benchmark screen
Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.
Lead (PB90)
0.0012 mg/L
Reported Dec 31, 2025
Copper (CU90)
1.512 mg/L
Reported Dec 31, 2009
Numerical coverage
2 comparable results
Missing values remain blank; absence is not treated as a pass.
Measured in mg/L
Local 0.0012
EPA limit 0.015
Measured in mg/L
Local 1.512
EPA limit 1.3
100% line = listed limit
| Contaminant or rule | System | Status | Period |
|---|---|---|---|
| Consumer Confidence Rule | IN5206005 | Unaddressed | Oct 1, 2025 |
| LEAD AND COPPER RULE REVISIONS | IN5206005 | Resolved | Jul 2, 2025through Dec 31, 2025 |
| Consumer Confidence Rule | IN5206005 | Unaddressed | Jul 1, 2025 |
No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.
Solutions matcher
Matched to Thorntown ZIP 46071 using 349 PPM nearby hardness and 2 reported measurement benchmarks.
Scale protection
349 PPM is 3× the high-hardness trigger used by this matcher.
Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.
Compare whole-house systemsDrinking water protection
Copper (90th percentile) has a measured benchmark flag or active health-based SDWIS record in this profile.
A certified multi-stage RO system targets a broader range of dissolved contaminants at the kitchen tap.
Explore under-sink filtrationAffiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.
Frequently asked
EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.
Nearby USGS observations produce an estimate of 349 PPM, or 20.4 grains per gallon, classified as very hard. This is not a household tap measurement.
At 349 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.