Skip to content

Local water dashboard

Official source aggregation

Water quality in Pittsboro, NC 27312

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Chatham County.

1 reported benchmark flag
Primary matched system
Pittsboro, Town Of
Source water
Surface water
County
Chatham County
Profile updated

At a glance

What the current records say

Hardness

Soft

40.5 PPM · 2.4 GPG

Compliance screen

No active flag

0 active health-based records

Lead 90th percentile

0 mg/L

0% of action level

Utility match

5 systems

Serves 6,708 people system-wide

Hardness meter

How hard is the water?

Soft

Estimated local hardness

USGS hardness classification scale

40.5 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

40.5

mg/L as CaCO₃ equivalent

Grains per gallon

2.4

1 GPG ≈ 17.1 PPM

What this means at home

At 40.5 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

52

Nearest site

3.5 mi

Observation range

Jan 15, 2016–Jun 9, 2026

Estimate confidence

Moderate

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: HAW RIVER NEAR BYNUM, NC (Stream).USGS source documentation ↗

Regional context

Is 27312 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Pittsboro median

41 PPM

About the same

1 indexed ZIP readings · Range 40.5–40.5 PPM

North Carolina median

41 PPM

About the same

519 indexed ZIP readings · Range 4.7–267.5 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass1 fail

Lead (PB90)

0 mg/L

Reported Dec 31, 2028

Copper (CU90)

1.66 mg/L

Reported Dec 31, 1993

Numerical coverage

2 comparable results

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 0

EPA limit 0.015

Local level is 0% of the listed EPA limit.

Copper (90th percentile)

Measured in mg/L

Fail

Local 1.66

EPA limit 1.3

Local level is 128% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
10
Health-based
3
Active health-based
0
Contaminant or ruleSystemStatusPeriod
LEAD AND COPPER RULE REVISIONSHealth-basedNC0319015ResolvedOct 17, 2024through Dec 13, 2024
LEAD AND COPPER RULE REVISIONSNC0319015ResolvedOct 17, 2024through Dec 13, 2024
LEAD AND COPPER RULE REVISIONSHealth-basedNC0319050ResolvedOct 17, 2024through Oct 23, 2024
LEAD AND COPPER RULE REVISIONSNC0319050ResolvedOct 17, 2024through Oct 23, 2024
LEAD AND COPPER RULE REVISIONSHealth-basedNC4019010ResolvedOct 17, 2024through Jan 7, 2025
LEAD AND COPPER RULE REVISIONSNC4019010ResolvedOct 17, 2024through Jan 7, 2025
Lead and Copper RuleNC0319015AddressedOct 1, 2024
Revised Total Coliform RuleNC0319137ResolvedDec 11, 2023through Dec 11, 2023
Lead and Copper RuleNC0319015ResolvedJan 1, 2022through Mar 21, 2022
Consumer Confidence RuleNC0319015ResolvedJul 1, 2021through Oct 14, 2021

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Pittsboro ZIP 27312 using 40.5 PPM nearby hardness and 2 reported measurement benchmarks.

1 match

Drinking water protection

Under-Sink Reverse Osmosis System

Copper (90th percentile) has a measured benchmark flag or active health-based SDWIS record in this profile.

A certified multi-stage RO system targets a broader range of dissolved contaminants at the kitchen tap.

Explore under-sink filtration

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Frequently asked

Water questions for Pittsboro

Is tap water safe in Pittsboro?+

EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.

How hard is the water?+

Nearby USGS observations produce an estimate of 40.5 PPM, or 2.4 grains per gallon, classified as soft. This is not a household tap measurement.

Do I need a water softener?+

There is no high-hardness trigger in this profile. Confirm with a tap test before buying equipment.