Skip to content

Local water dashboard

Official source aggregation

Water quality in Corona, SD 57227

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Roberts County.

No active health-based violation reported
Primary matched system
Corona
Source water
Groundwater
County
Roberts County
Profile updated

At a glance

What the current records say

Hardness

Very Hard

403 PPM · 23.6 GPG

Compliance screen

No active flag

0 active health-based records

Lead 90th percentile

0.001 mg/L

7% of action level

Utility match

1 system

Serves 69 people system-wide

Hardness meter

How hard is the water?

Very Hard

Estimated local hardness

USGS hardness classification scale

403 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

403

mg/L as CaCO₃ equivalent

Grains per gallon

23.6

1 GPG ≈ 17.1 PPM

What this means at home

At 403 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

6

Nearest site

25.7 mi

Observation range

May 23, 2016–May 1, 2024

Estimate confidence

Low

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: 127N49W36BBBB R(SISSETON GW WELL RB-77-K) (Well).USGS source documentation ↗

Regional context

Is 57227 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Corona median

403 PPM

About the same

1 indexed ZIP readings · Range 403–403 PPM

South Dakota median

516 PPM

113 PPM lower

234 indexed ZIP readings · Range 20.5–1330 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass

Lead (PB90)

0.001 mg/L

Reported Dec 31, 2024

Copper (CU90)

Not available

No numerical 90th-percentile result

Numerical coverage

1 comparable result

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 0.001

EPA limit 0.015

Local level is 7% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
5
Health-based
0
Active health-based
0
Contaminant or ruleSystemStatusPeriod
Revised Total Coliform RuleSD4600009ArchivedDec 1, 2025through Dec 31, 2025
Consumer Confidence RuleSD4600009UnaddressedJul 1, 2025
Lead and Copper RuleSD4600009ResolvedOct 1, 2023through Sep 30, 2024
TTHMSD4600009ResolvedAug 1, 2023through Sep 30, 2023
Total Haloacetic Acids (HAA5)SD4600009ResolvedAug 1, 2023through Sep 30, 2023

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Corona ZIP 57227 using 403 PPM nearby hardness and 1 reported measurement benchmarks.

1 match

Scale protection

High-Capacity Whole House Water Softener

403 PPM is 3× the high-hardness trigger used by this matcher.

Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.

Compare whole-house systems

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Frequently asked

Water questions for Corona

Is tap water safe in Corona?+

EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.

How hard is the water?+

Nearby USGS observations produce an estimate of 403 PPM, or 23.6 grains per gallon, classified as very hard. This is not a household tap measurement.

Do I need a water softener?+

At 403 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.